Locomotive 4 8 4 - The 4-8-4 was the ultimate wheel configuration for the modern passenger and fast freight steam locomotive. The eight driver arrangement was usable on almost every main line in North America and with drivers up to 80 inches in diameter allowed any reasonable speed that the railroad could handle.

 
The 4-8-4's were given Class J and built by the master steam builders at N&W's Roanoke, Virginia shops. These machines could haul the mail, quite literally, and were the most powerful 4-8-4's ever built with tractive efforts reaching 80,000 pounds, boiler pressures of 300 psi, and perfectly couter-balanced to reach unimaginable speeds of 140 mph!. Lopunny futanari

May 8, 2023 · The 4-8-4's were given Class J and built by the master steam builders at N&W's Roanoke, Virginia shops. These machines could haul the mail, quite literally, and were the most powerful 4-8-4's ever built with tractive efforts reaching 80,000 pounds, boiler pressures of 300 psi, and perfectly couter-balanced to reach unimaginable speeds of 140 mph! Between 1936 and 1940 it built 28 Class O-5a Northerns (road numbers 5608 through 5635) in its own shops in W. Burlington, IA. All 36 of these locomotives had 74" drivers, 28 x 30 cylinders, 250 psi boiler pressure, and had a traction effort of 67,500 lbs. The first eight weighed 461,000 lbs and the balance weighed 473,700 pounds. Union Pacific 4-8-4 #838, featuring classic elephant-ear smoke deflectors, appears to be slowly backing towards the water plug in Council Bluffs, Iowa on September 21, 1958. By the date of this photo the locomotive was finishing up its last days in freight service before retirement. Bernard Corbin photo. American-Rails.com collection. HistoryUnder the Whyte notation for the classification of steam locomotives, 4-8-4 represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. Canadian National 6213 is a preserved 4-8-4 steam locomotive on static display in Toronto, Ontario, Canada at the Toronto Railway Museum (TRM) on the lands of the former CPR John St. Roundhouse. It was on active duty until 1959 and was donated by Canadian National Railway (CNR) to the City of Toronto government in 1960.May 8, 2023 · The 4-8-4's were given Class J and built by the master steam builders at N&W's Roanoke, Virginia shops. These machines could haul the mail, quite literally, and were the most powerful 4-8-4's ever built with tractive efforts reaching 80,000 pounds, boiler pressures of 300 psi, and perfectly couter-balanced to reach unimaginable speeds of 140 mph! The 4-8-4's were given Class J and built by the master steam builders at N&W's Roanoke, Virginia shops. These machines could haul the mail, quite literally, and were the most powerful 4-8-4's ever built with tractive efforts reaching 80,000 pounds, boiler pressures of 300 psi, and perfectly couter-balanced to reach unimaginable speeds of 140 mph!This graph shows the calculated drawbar horsepower curves for five classes in the first wave of 4-8-4s: Lackawanna Q-1, Canadian National U-2-a, Northern Pacific A, Santa Fe 3751, and Canadian Pacific K-1. Neil Carlson. In the days of steam it was a normal practice to estimate the horsepower potential of a locomotive.Shop our full model locomotive inventory & order online today! ... Broadway Limited 7234 N ALCo 4-8-8-4 Big Boy, Paragon4 DCC Sound, Union Pacific #4022 Post-1944October 4, 2000. Atchison, Topeka and Santa Fe 3751 is a class 3751 4-8-4 "Heavy Mountain" type steam locomotive built in May 1927 by the Baldwin Locomotive Works in Eddystone (Philadelphia), Pennsylvania for the Atchison, Topeka & Santa Fe Railway (ATSF). No. 3751 was the first 4-8-4 steam locomotive built for the Santa Fe and was referenced ...Data from "4-8-4 Locomotives on the Northern Pacific," Baldwin Locomotives (1937), pp. 27-28 and NP to 1944 Locomotive Diagrams supplied in May 2004 by Allen Stanley from his extensive Rail Data Exchange. Works numbers were 62163-62166 in March 1938, 62167-62168. in April and 62169-62170 in May. As suggested by the 1937 account of the A-2s ...This 4-8-4 compound locomotive was an experiment built in 1931 by ALCO for the New York Central Railroad. It carried road number 800 and was designated Class HS-1a. It did poorly on test runs and was used only as a hump shunting engine at Selkirk yard until it was scrapped in 1939.Swiss classification: 4/9; This wheel arrangement was proposed by Lima Locomotive Works in 1949 as a continuation of their "Super Power" concept, essentially an expansion of the 4-8-4. A larger firebox similar to the ones on the 2-6-6-6 locomotives built by Lima would have been fitted, allowing for greater power at speed. Despite promotion by ... These locomotives were the first in a large series of 4-8-4s of very similar design that totalled more than 200 engines. U-2a (works #1800-1819) numbered from 6100 to 6119 and delivered from Canadian Loco Works in 1927. U-2b (6120-6139), delivered from Montreal in 1927 (works #67351-67370), identical except for 233,400-lb weight on drivers and ... The lights and sounds came on at 7.5V. The locomotive started moving smoothly at around 11V at a scale 3.5 scale mph. The 4-8-4 achieved at top speed of 79 scale mph at 22V. The full-size GS-4s maximum speed was 110 mph. Engine and idle sounds, brake squeal, and the smoke unit are the only effects available in DC.Water cap. Canadian National 6213 is a preserved 4-8-4 steam locomotive on static display in Toronto, Ontario, Canada at the Toronto Railway Museum (TRM) on the lands of the former CPR John St. Roundhouse. It was on active duty until 1959 and was donated by Canadian National Railway (CNR) to the City of Toronto government in 1960. First run. 6 February 1981. The South African Railways Class 26 4-8-4 of 1981, popularly known as the Red Devil, is a 4-8-4 steam locomotive which was rebuilt from a Class 25NC locomotive by mechanical engineer David Wardale from England while in the employ of the South African Railways. The rebuilding took place at the Salt River Works in Cape ...To that end he ordered the company's superintendent of motive power and rolling equipment, E. Paul Gangewere, to get together with the design engineers at the Baldwin Locomotive Works to develop a plan to convert 30 of the railroad's I-10a 2-8-0 Consolidations to new 4-8-4 Northerns. These 30 steam locomotives (road numbers 2100 -2129) were ...Left: The NYC HS-1a of 1931. No.800. This 4-8-4 compound locomotive was an experiment built in 1931 by ALCO for the New York Central Railroad. It carried road number 800 and was designated Class HS-1a. It did poorly on test runs and was used only as a hump shunting engine at Selkirk yard until it was scrapped in 1939. A 4-8-8-4 in the Whyte notation for the classification of steam locomotives by wheel arrangement, is a locomotive with a four-wheel leading truck, two sets of eight driving wheels, and a four-wheel trailing truck. Only one model of locomotives has ever used this configuration, and that is commonly known as "Union Pacific Big Boys" after the ...In the early 1940s, the Missouri Pacific Railroad converted all 25 of its 2-8-4 Berkshires into 4-8-4 Northerns. These rebuilt locomotives (road numbers 2101 through 2125) were given 75" drivers, greater boiler capacity, a cast steel engine bed and roller bearings on all axles. They had 28 x 30 cylinders, a boiler pressure of 250 psi, a total ... The 4-8-4's were given Class J and built by the master steam builders at N&W's Roanoke, Virginia shops. These machines could haul the mail, quite literally, and were the most powerful 4-8-4's ever built with tractive efforts reaching 80,000 pounds, boiler pressures of 300 psi, and perfectly couter-balanced to reach unimaginable speeds of 140 mph!There was an almost forgotten earlier 4-8-4 built in 1931 by ALCO. This three-cylinder experimental locomotive carried road number 800 and was designated Class HS-1a. It did not do well on its test runs and was put to work as a hump engine at Selkirk yard. Unfortunately, EMD F-7 passenger diesels were being delivered at the same time as the 4-8 ...The Union Pacific Railroad bought 45 4-8-4s in three orders from the American Locomotive Company. The second order of 15 locomotives (road numbers 820 through 834) was delivered in 1939. These locomotives were designated as Class FEF-2. They were designed to have 80" drivers, 25 x 32 cylinders, a boiler pressure of 300 psi, and a weight of 483, Jul 26, 2019 · The lights and sounds came on at 7.5V. The locomotive started moving smoothly at around 11V at a scale 3.5 scale mph. The 4-8-4 achieved at top speed of 79 scale mph at 22V. The full-size GS-4s maximum speed was 110 mph. Engine and idle sounds, brake squeal, and the smoke unit are the only effects available in DC. Feb 9, 2018 · Rio Grande Info cited Robert Schaefer's "D&RGW 4-8-4 Westerns" in "The Prospector", Volume 2 Number 2 for the very interesting origin story of this class. Originally the D&RGW was attracted to Alco's variation on the Delaware, Lackawanna & Western's 4-8-4, in part because Alco had developed a single-piece cylinder and frame casting. Under the Whyte notation for the classification of steam locomotives by wheel arrangement, the 4-8-4+4-8-4 is a Garratt locomotive. The wheel arrangement is effectively two 4-8-4 locomotives operating back to back, with the boiler and cab suspended between the two engine units. The Canadian National No. 6400 is a Class U-4-a 4-8-4 "Northern" type steam locomotive built by Montreal Locomotive Works in 1936 for the Canadian National Railway, and the first U-4 class "Confederation" to be delivered. The Canadian National Railway used this locomotive for passenger service for much of its career. The Canadian National U-4 class was a result of wind tunnel research ...Union Pacific 844 is a class "FEF-3" 4-8-4 "Northern" type steam locomotive owned and operated by the Union Pacific Railroad for its heritage fleet.Built in December 1944 by the American Locomotive Company (ALCO) of Schenectady, New York, No. 844 is one of four surviving FEF series locomotives and the only one in operation.Nacional de Mexico 4-8-4 Locomotives in Mexico. The Ferrocarriles Nacionales de Mexico (National Railways of Mexico) bought a total of 32 Northern type, Class QR-1, locomotives in 1946. NdeM purchased 16 from the American Locomotive Company and 16 from the Baldwin Locomotive Works. On the NdeM these locomotives were called "Niágaras" and were ... The St. Louis Southwestern Railroad acquired Northerns at three different times. It bought 10 Class L-1 Northerns in 1930 from the Baldwin Locomotive Works and assigned them road numbers 800 through 809. These 4-8-4s were oil burners with 70" drivers, 26 x 30 cylinders, a boiler pressure of 250 psi, a weight of 419,800 lbs and a tractive effort ...The New York Central Railroad's Niagara was a 4-8-4 "Northern" type steam locomotive named after the Niagara River and Falls. It had a 4-8-4 wheel arrangement and is considered as one of the most efficient 4-8-4 locomotives ever built. The first New York Central Railroad Northern was ordered in 1931: No. 800, [1] an experimental locomotive that ... 4-8-2. Under the Whyte notation for the classification of steam locomotives, 4-8-2 represents the wheel arrangement of four leading wheels, eight powered and coupled driving wheels and two trailing wheels. This type of steam locomotive is commonly known as the Mountain type. [1]Santa Fe 2926 is a former Atchison, Topeka and Santa Fe Railway (ATSF) class 2900 4-8-4 type steam locomotive, built by Baldwin in 1944. It was used to pull passenger and fast freight trains, mostly throughout New Mexico until it was retired from revenue service in 1956. It was subsequently donated to a park in Albuquerque for static display. Rivarossi’s 4-8-8-4 Big Boy has been around a long time, but with its fine wire details, smooth performance, and updated sound decoder, this is definitely a modern scale locomotive. ­Hobbyists modeling the Union Pacific’s steam era shouldn’t need a reason to want one (or more) of these brawny beauties in their roundhouses.A 4-8-8-4 in the Whyte notation for the classification of steam locomotives by wheel arrangement, is a locomotive with a four-wheel leading truck, two sets of eight driving wheels, and a four-wheel trailing truck. Only one model of locomotives has ever used this configuration, and that is commonly known as "Union Pacific Big Boys" after the ... S2. Numbers. 201–240. Retired. 1954-1956. Disposition. All scrapped, but one tender survives. he Milwaukee Road S2 Class was a class of 40 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1937 and 1940 and operated by the Milwaukee Road until the mid 1950s. The locomotives saw service in pulling freight..A 4-8-8-4 in the Whyte notation for the classification of steam locomotives by wheel arrangement, is a locomotive with a four-wheel leading truck, two sets of eight driving wheels, and a four-wheel trailing truck. Only one model of locomotives has ever used this configuration, and that is commonly known as "Union Pacific Big Boys" after the ...The Canadian National No. 6400 is a Class U-4-a 4-8-4 "Northern" type steam locomotive built by Montreal Locomotive Works in 1936 for the Canadian National Railway, and the first U-4 class "Confederation" to be delivered. The Canadian National Railway used this locomotive for passenger service for much of its career. The Canadian National U-4 class was a result of wind tunnel research ...Lionel O Scale Delaware Lackawanna & Western 4-8-4 Steam Engine Set 6-18003 W18. $225.00.Nacional de Mexico 4-8-4 Locomotives in Mexico. The Ferrocarriles Nacionales de Mexico (National Railways of Mexico) bought a total of 32 Northern type, Class QR-1, locomotives in 1946. NdeM purchased 16 from the American Locomotive Company and 16 from the Baldwin Locomotive Works. On the NdeM these locomotives were called "Niágaras" and were ... She was the last of three K-4-b class Pacifics built for the Grand Trunk Western by Baldwin Locomotive Works in 1929. They featured enclosed or vestibule cabs similar to those on GTW's 4-8-4s and 4-8-2s, and also introduced the exhaust steam injector in place of the feedwater heater of the K-4-a class. This photo was taken in the summer of 1953.The Canadian National No. 6400 is a Class U-4-a 4-8-4 "Northern" type steam locomotive built by Montreal Locomotive Works in 1936 for the Canadian National Railway, and the first U-4 class "Confederation" to be delivered. The Canadian National Railway used this locomotive for passenger service for much of its career. The Canadian National U-4 class was a result of wind tunnel research ... To that end he ordered the company's superintendent of motive power and rolling equipment, E. Paul Gangewere, to get together with the design engineers at the Baldwin Locomotive Works to develop a plan to convert 30 of the railroad's I-10a 2-8-0 Consolidations to new 4-8-4 Northerns. These 30 steam locomotives (road numbers 2100 -2129) were ...Aug 31, 2020 · Union Pacific rostered ten 4-10-2 locomotives that were three-cylindered machines developing 77,917 lbs of tractive effort on 63" drivers. They were a precursor to the 4-12-2 Union Pacific type, which was developed as a fast freight locomotive with 67-inch drivers and three cylinders, with a long shallow firebox supported by the training truck and drivers, similar to the firebox configuaraton ... The Southern Pacific GS-4 is a class of streamlined 4-8-4 "Northern" type steam locomotive operated by the Southern Pacific Railroad (SP) from 1941 to 1958. A total of twenty-eight were built by the Lima Locomotive Works, numbered 4430 through 4457. GS stands for "Golden State" or "General Service." Unlike the GS-3, the GS-4 had a dual ...The St. Louis Southwestern Railroad acquired Northerns at three different times. It bought 10 Class L-1 Northerns in 1930 from the Baldwin Locomotive Works and assigned them road numbers 800 through 809. These 4-8-4s were oil burners with 70" drivers, 26 x 30 cylinders, a boiler pressure of 250 psi, a weight of 419,800 lbs and a tractive effort ... First run. 6 February 1981. The South African Railways Class 26 4-8-4 of 1981, popularly known as the Red Devil, is a 4-8-4 steam locomotive which was rebuilt from a Class 25NC locomotive by mechanical engineer David Wardale from England while in the employ of the South African Railways. The rebuilding took place at the Salt River Works in Cape ... The lights and sounds came on at 7.5V. The locomotive started moving smoothly at around 11V at a scale 3.5 scale mph. The 4-8-4 achieved at top speed of 79 scale mph at 22V. The full-size GS-4s maximum speed was 110 mph. Engine and idle sounds, brake squeal, and the smoke unit are the only effects available in DC.Swiss classification: 4/9; This wheel arrangement was proposed by Lima Locomotive Works in 1949 as a continuation of their "Super Power" concept, essentially an expansion of the 4-8-4. A larger firebox similar to the ones on the 2-6-6-6 locomotives built by Lima would have been fitted, allowing for greater power at speed. Despite promotion by ... The Union Pacific Big Boy is a type of simple articulated 4-8-8-4 steam locomotive manufactured by the American Locomotive Company (ALCO) between 1941 and 1944 and operated by the Union Pacific Railroad in revenue service until 1962. The Great Northern Railway obtained its first "Northerns" in 1929, when six Class S-1s were delivered from the Baldwin Locomotive Works. These 4-8-4s were given road numbers 2550 through 2555 and had 73" drivers, 28 x 30 cylinders, a boiler pressure of 250 psi, a weight of 472,120 lbs and a tractive effort of 68,466 pounds. Dec 20, 2016 · The Big Boy utilized a 4-8-8-4 wheel arrangement and was the only locomotive to do so. At the front of the engine was a four-wheel leading truck that had 36 in (.91 m) wheels. This was followed by eight 68 in (1.73 m) drive wheels, with a single piston driving a set of four wheels on each side of the engine. 4-8-2, 4-6-4. Benefits. Deeper firebox than the 4-8-2. Under the Whyte notation for the classification of steam locomotives, 4-8-4 represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles.The Soviet locomotive class P36 ( Russian: П36) was a Soviet mainline passenger steam locomotive type. Between 1950 and 1956, 251 locomotives were built. The locomotives were nicknamed "Generals" because of the red stripe down the side. The P36 had the same power as a class IS locomotive but the axle loading of 18 tons allowed its use on the ...Aug 31, 2020 · Union Pacific rostered ten 4-10-2 locomotives that were three-cylindered machines developing 77,917 lbs of tractive effort on 63" drivers. They were a precursor to the 4-12-2 Union Pacific type, which was developed as a fast freight locomotive with 67-inch drivers and three cylinders, with a long shallow firebox supported by the training truck and drivers, similar to the firebox configuaraton ... Strasburg Railroad, Strasburg, PA. operational. Baldwin (Burnham) #28343, 1906. From the IRM, Union, IL, then the Boone & Scenic Valley Railroad, Boone, IA. Featured in Thomas & The Magic Railroad. Taken out of service in late 2018. Returned to operation in September 2019. Only operating 4-8-0 type in the US. 4-8-4. The Northerns are steam locomotives that represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. The type was first used by the Northern Pacific Railway, and initially named the Northern Pacific, but railfans and railroad employees ... Nacional de Mexico 4-8-4 Locomotives in Mexico. The Ferrocarriles Nacionales de Mexico (National Railways of Mexico) bought a total of 32 Northern type, Class QR-1, locomotives in 1946. NdeM purchased 16 from the American Locomotive Company and 16 from the Baldwin Locomotive Works. On the NdeM these locomotives were called "Niágaras" and were ... Union Pacific 4-8-4 #838, featuring classic elephant-ear smoke deflectors, appears to be slowly backing towards the water plug in Council Bluffs, Iowa on September 21, 1958. By the date of this photo the locomotive was finishing up its last days in freight service before retirement. Bernard Corbin photo. American-Rails.com collection. HistoryThe Ferrocarriles Nacionales de Mexico (National Railways of Mexico) bought a total of 32 Northern type, Class QR-1, locomotives in 1946. NdeM purchased 16 from the American Locomotive Company and 16 from the Baldwin Locomotive Works. On the NdeM these locomotives were called "Niágaras" and were among the few that it bought new.The B&O bought thirteen 4-8-2s from the Boston & Maine. They were given road numbers 5650 through 5662 and were designated as Class T-4 and were used until 1958. There are no surviving B&O "Mountains". The Class Ts (numbers 5500 & 5501) were scrapped in 1953.Strasburg Railroad, Strasburg, PA. operational. Baldwin (Burnham) #28343, 1906. From the IRM, Union, IL, then the Boone & Scenic Valley Railroad, Boone, IA. Featured in Thomas & The Magic Railroad. Taken out of service in late 2018. Returned to operation in September 2019. Only operating 4-8-0 type in the US. The Union Pacific FEF series consists of 45 4-8-4 "Northern" steam locomotives built by the American Locomotive Company (ALCO) between 1937 and 1944 and operated by the Union Pacific Railroad until 1959. The final steam locomotives built for the Union Pacific, the FEFs represented the apex of dual-service steam locomotive development in the ...A private Railway operating in New Zealand at the time exclusively purchased Baldwin products after facing the same difficulties with British builders the NZR had. The Wellington & Manawatu Railway (1881–1909) operated small fleets of 2-8-0 (4), 2-6-2 (6), 2-8-2 (1), 4-6-0 (2) and a large 2-8-4 (1) tank locomotive. When the NZR took over the ... The Union Pacific Big Boy is a type of simple articulated 4-8-8-4 steam locomotive manufactured by the American Locomotive Company (ALCO) between 1941 and 1944 and operated by the Union Pacific Railroad in revenue service until 1962. The 25 Big Boy locomotives were built to haul freight over the Wasatch Range between Ogden, Utah, and Green ...Ultra-realistic Union Pacific 4-8-8-4 “Big Boy” steam locomotive. Complete and authentic operating controls and characteristics. Optional configurations for all levels of difficulty from manual operations to auto-fireman and auto-engineer assists, the locomotive is also compatible with Simple Controls. Three locomotive livery variations.The Baldwin 4-8+8-4 750/8DE1 was the Baldwin Locomotive Works ' first attempt at building a road diesel locomotive. The trucks were configured in a 2-D+D-2 wheel arrangement. Only a single test unit was built. In 1943 Baldwin built an experimental "Centipede" as a demonstrator unit, which was assigned road #6000.Jun 12, 2006 · Fred McLeod. Union Pacific 4-8-8-4 No. 4023 prepares to depart Cheyenne, Wyo., with a westward freight in May 1954. E.C. Storm. It was, more or less, an eight-coupled Challenger. The locomotive boasted both the adhesion of an eight-coupled articulated, needed to haul heavy trains, and large 68-inch driving wheels (only 1-2 inches smaller than ... This graph shows the calculated drawbar horsepower curves for five classes in the first wave of 4-8-4s: Lackawanna Q-1, Canadian National U-2-a, Northern Pacific A, Santa Fe 3751, and Canadian Pacific K-1. Neil Carlson. In the days of steam it was a normal practice to estimate the horsepower potential of a locomotive.Nov 1, 2004 · It has flaws, but Broadway Limited Imports has shown an ability to learn from mistakes. Fans of western steam power will be happy to have it and to look forward to comparing BLI releases of Santa Fe (and Union Pacific) locomotives. HO Santa Fe 4-8-4. Price: $329.99. Manufacturer: Missouri Pacific 4-8-4 Northerns The Missouri Pacific Railroad converted all 25 of its 2-8-4 Berkshires into 4-8-4 Northerns in the early 1940s. The rebuilt locomotives (road numbers 2101 through 2125) were given 75" drivers, greater boiler capacity, a cast steel engine bed and roller bearings on all axles.S2. Numbers. 201–240. Retired. 1954-1956. Disposition. All scrapped, but one tender survives. he Milwaukee Road S2 Class was a class of 40 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1937 and 1940 and operated by the Milwaukee Road until the mid 1950s. The locomotives saw service in pulling freight.. May 11, 2023 · Union Pacific would go on to roster two distinct classes of 4-8-8-4's listed simply as Class 1 (#4000-4019) and Class 2 (#4020-4024) with Alco delivering the final locomotive in 1944. Union Pacific "Big Boys" #4013 and #4003 layover near the shops at Cheyenne, Wyoming, circa 1957. Canadian National 6213 is a preserved 4-8-4 steam locomotive on static display in Toronto, Ontario, Canada at the Toronto Railway Museum (TRM) on the lands of the former CPR John St. Roundhouse. It was on active duty until 1959 and was donated by Canadian National Railway (CNR) to the City of Toronto government in 1960.Missouri Pacific 4-8-4 Northerns The Missouri Pacific Railroad converted all 25 of its 2-8-4 Berkshires into 4-8-4 Northerns in the early 1940s. The rebuilt locomotives (road numbers 2101 through 2125) were given 75" drivers, greater boiler capacity, a cast steel engine bed and roller bearings on all axles. Swiss classification: 4/9; This wheel arrangement was proposed by Lima Locomotive Works in 1949 as a continuation of their "Super Power" concept, essentially an expansion of the 4-8-4. A larger firebox similar to the ones on the 2-6-6-6 locomotives built by Lima would have been fitted, allowing for greater power at speed. Despite promotion by ...China Railways KF. The Class KF (聯盟型, 'Confederation class', re-designated "ㄎㄈ" or "KF") was a 4-8-4 mainline passenger steam locomotive type built in the United Kingdom by the Vulcan Foundry for the railways of China. Between 1935 and 1936, 24 locomotives were built for the Guangzhou – Hankou Railway designated as the 600 series. [1]The 4-8-4 filled the same roles as the 4-8-2. The first Northerns built were intended for passenger service, and were supplied to the Santa Fe, Great Northern, Southern Pacific, and Lackawanna (which called them Poconos), to name a few roads.Bachmann Trains Online Store! : 4-8-4 Northern - Gift Shop Catalogs HO Parts Large Scale Parts N Parts On30 Parts General Parts & Supplies O Scale - Williams Track DCC Sound Boards E-Z App boards Locomotive / Tender Speakers All Scale Kit Bashing ecommerce, open source, shop, online shopping, storeThe 4-8-4 was the ultimate wheel configuration for the modern passenger and fast freight steam locomotive. The eight driver arrangement was usable on almost every main line in North America and with drivers up to 80 inches in diameter allowed any reasonable speed that the railroad could handle. To that end he ordered the company's superintendent of motive power and rolling equipment, E. Paul Gangewere, to get together with the design engineers at the Baldwin Locomotive Works to develop a plan to convert 30 of the railroad's I-10a 2-8-0 Consolidations to new 4-8-4 Northerns. These 30 steam locomotives (road numbers 2100 -2129) were ...Swiss classification: 4/9; This wheel arrangement was proposed by Lima Locomotive Works in 1949 as a continuation of their "Super Power" concept, essentially an expansion of the 4-8-4. A larger firebox similar to the ones on the 2-6-6-6 locomotives built by Lima would have been fitted, allowing for greater power at speed. Despite promotion by ... These locomotives were the first in a large series of 4-8-4s of very similar design that totalled more than 200 engines. U-2a (works #1800-1819) numbered from 6100 to 6119 and delivered from Canadian Loco Works in 1927. U-2b (6120-6139), delivered from Montreal in 1927 (works #67351-67370), identical except for 233,400-lb weight on drivers and ... 4-8-4. Benefits. Better high speed performance. Drawbacks. Wheel slip. A 4-4-4-4 steam locomotive, in the Whyte notation for describing locomotive wheel arrangements, has a four-wheel leading truck, two sets of four driving wheels, and a four-wheel trailing truck. While it would be possible to make an articulated locomotive of this arrangement ... Lionel O Scale Delaware Lackawanna & Western 4-8-4 Steam Engine Set 6-18003 W18. $225.00.The St. Louis Southwestern Railroad acquired Northerns at three different times. It bought 10 Class L-1 Northerns in 1930 from the Baldwin Locomotive Works and assigned them road numbers 800 through 809. These 4-8-4s were oil burners with 70" drivers, 26 x 30 cylinders, a boiler pressure of 250 psi, a weight of 419,800 lbs and a tractive effort ... This caught the attention of the Western Maryland and in 1947 it took delivery of twelve 4-8-4s from the Baldwin Locomotive Works. Being a "southern" railroad WM rejected the name "Northern" and called its 4-8-4s "Potomacs". These twelve Class J-1 "Potomacs" (road numbers 1401 through 1412) were designed for freight service with 69" drivers, 26 ...Each end of the double-ended locomotive has a four-wheel truck to guide the locomotive at speed, giving the R1 a 4-8-4 wheel arrangement in the Whyte notation (AAR: 2-D-2; UIC: 2'Do'2). Besides the R1, the PRR did not build or order any other 4-8-4 locomotives, however the T1 duplex was essentially a 4-8-4 with 2 sets of driving wheels, making ... Rio Grande Info cited Robert Schaefer's "D&RGW 4-8-4 Westerns" in "The Prospector", Volume 2 Number 2 for the very interesting origin story of this class. Originally the D&RGW was attracted to Alco's variation on the Delaware, Lackawanna & Western's 4-8-4, in part because Alco had developed a single-piece cylinder and frame casting.Missouri Pacific 4-8-4 Northerns The Missouri Pacific Railroad converted all 25 of its 2-8-4 Berkshires into 4-8-4 Northerns in the early 1940s. The rebuilt locomotives (road numbers 2101 through 2125) were given 75" drivers, greater boiler capacity, a cast steel engine bed and roller bearings on all axles.May 9, 2022 · Trix HO scale Big Boy 4-8-8-4 steam locomotive Reviewed in the April 2002 issue The Trix HO Big Boy 4-8-8-4 steam locomotive is largely built of die-cast metal, with numerous added parts of plastic and wire. Märklin has raised die-casting to a high art and this locomotive reflects all of its builder’s expertise. Price: $598

The Santa Fe 2900 Class was a series of 30 4-8-4 type steam locomotives built between 1943 and 1944 for Atchison, Topeka and Santa Fe Railroad and pulled freight and passenger trains until retirement in the early to late-1950s. Today, six 2900s survive, with five units on static display and one, No. 2926, has been restored to operating ... . Aspen dental all on 4 cost

locomotive 4 8 4

Oct 19, 2018 · In 1930, the SP designed a locomotive similar to those Mountains that had a very large firebox (90.4 sq ft) and a four wheel trailing truck to support it. Thus, evolved the Southern Pacific 4-8-4 which was designated Class GS (Golden State) by the SP. In early 1937, six more "Golden States" arrived but this time from the Lima Locomotive Works. The Nashville, Chattanooga & St. Louis Railroad bought five 4-8-4 locomotives in 1930, which they called "Dixies" (instead of "Northerns" - a name that would seem inappropriate on a fine southern railroad). These 1930 "Dixies" came from the American Locomotive Company and were designated Class J-2 and assigned road numbers 565 through 569.4-8-4 Steam Locomotives. Category page. Edit. A 4-8-4 "Northern" is a type of wheel-arrangement for a large tender-type steam locomotive. Which refers to engines with 4 leading wheels, 8 driving wheels and 4 trailing wheels. The big J3 engine, the sole survivor of a class of 20 built during the desperate days of World War II, is a 1942 product of the American Locomotive Company. The last time someone proposed removing the 4-8-4 from Centennial Park, in 2001, the parks board declined the offer.May 12, 2023 · Union Pacific 4-8-4 #838, featuring classic elephant-ear smoke deflectors, appears to be slowly backing towards the water plug in Council Bluffs, Iowa on September 21, 1958. By the date of this photo the locomotive was finishing up its last days in freight service before retirement. Bernard Corbin photo. American-Rails.com collection. History 4-8-2. Under the Whyte notation for the classification of steam locomotives, 4-8-2 represents the wheel arrangement of four leading wheels, eight powered and coupled driving wheels and two trailing wheels. This type of steam locomotive is commonly known as the Mountain type. [1] The New York Central Railroad's Niagara was a 4-8-4 "Northern" type steam locomotive named after the Niagara River and Falls. It had a 4-8-4 wheel arrangement and is considered as one of the most efficient 4-8-4 locomotives ever built. The first New York Central Railroad Northern was ordered in 1931: No. 800, [1] an experimental locomotive that ... In the case of a long locomotive like the Big Boy, articulation allowed the engine to operate on tracks with curves as sharp as 20 degrees. ALCO built the Big Boys in Schenectady, New York, and two versions of the engine were made. Starting in 1941, 20 of the 4-8-8-4-1 class engines were made and numbered 4000–4019.The St. Louis–San Francisco class 4500 was a class of 25 4-8-4 "Northern" type steam locomotives built by the Baldwin Locomotive Works between 1942-1943 and operated by the St. Louis–San Francisco Railway . The first three operated in passenger service, pulling trains such as the Meteor. The rest pulled freight throughout the system until ...The Lima-Southern Pacific GS-4 ("GS" meaning for "Golden State" or "General Service") is a type of semi-streamlined 4-8-4 Northern steam locomotive built by the Lima Locomotive Works in 1941 and 1942 specifically for the Southern Pacific (SP) Railroad. They were assigned road numbers 4430 through 4457. The GS-4s were principally employed on SP's famous "Daylight" streamliners from 1941, but in ...Water cap. Factor of adh. Norfolk and Western 475 is a 4-8-0 "Mastodon" type steam locomotive built by the Baldwin Locomotive Works in June 1906 as part of the Norfolk and Western Railway's (N&W) first order of M class numbered 375–499. It was first assigned to haul freight trains on the N&W mainline before being reassigned to branch line ...Jim Wrinn. 4-8-4. •YEARS BUILT: 1926 to 1950. •MANUFACTURERS: Baldwin, Lima, Alco, Canadian Locomotive Co., Canadian Pacific Railway, Montreal, Norfolk & Western. •OPERATED ON: Most sizable railroads that provided fast freight and passenger service.Chesapeake & Ohio 614 is a class "J-3-A" 4-8-4 "Greenbrier" (Northern) type steam locomotive built in June 1948 by the Lima Locomotive Works in Lima, Ohio for the Chesapeake and Ohio Railway (C&O) as a member of the J-3-A class. As one of the last commercially built steam locomotives in the United States, the locomotive was built with the ...The Minneapolis, St. Paul & Sault Sainte Marie Railroad purchased four Class O-20, 4-8-4s in 1938 from the Lima Locomotive Works. They were given road numbers 5000 through 5003 and were assigned to both freight and passenger trains. These locomotives were designed with 75" drivers, 26 x 32 cylinders, a 270 psi boiler pressure, a weight of ...There was an almost forgotten earlier 4-8-4 built in 1931 by ALCO. This three-cylinder experimental locomotive carried road number 800 and was designated Class HS-1a. It did not do well on its test runs and was put to work as a hump engine at Selkirk yard. Unfortunately, EMD F-7 passenger diesels were being delivered at the same time as the 4-8 ...The Union Pacific Big Boy is a type of simple articulated 4-8-8-4 steam locomotive manufactured by the American Locomotive Company (ALCO) between 1941 and 1944 and operated by the Union Pacific Railroad in revenue service until 1962. .

Popular Topics